Mop&Glow seems to be a very popular in-home product here on the Island, so it will be the focus of our first tip of the week!
In my opinion, Mop&Glo is a mixed bag. When applied correctly to a properly prepared floor, the results can be stunning, leaving you with a satisfying protective shine to enjoy on those wonderful sunny days. However, we have noticed that there are a few common mistakes that are easy to make, though sometimes intensive to fix. The most common issues being either dirt and hair being trapped between the layers of dried product or the buildup and/or discoloration of floors due to extra solution or using on the wrong kind of floor.
So, the first question:
When Should You Use Mop&Glo?
Mop&Glo is used predominantly for tile, vinyl, hardwood, marble, linoleum, ceramic and other no-wax floors. It's main purpose is to create a protective surface that not only shines, but helps prevent everyday dents and scratches from marring the flooring underneath. Most importantly, it is not recommended for unsealed/worn wood or unsealed ceramic surfaces. *If applied to these surfaces, it can leave spots, streaks, and/or discoloration that can be very difficult and sometimes impossible to remove.
How Often Should Mop&Glo be Applied?
This depends on your floor as well as the rate of foot traffic across the floor in question. If you have heavy foot traffic and want the shiniest floor you can have, apply Mop&Glo two times a month maximum. For low or regular foot traffic, I find that applying once a month is all you need, which saves you product and greatly reduces the amount of build-up that eventually accumulates around the edges of the floors.
If you are nervous about using Mop&Glo on your hardwood floors or have already sworn it off due to a bad experience, watch the video below for an alternative way to keep your hardwood floors clean and shiny:
How to prepare and apply your floors for Mop&Glo
Technically, you can mop your floor straight with Mop&Glo as long as you pick up any leftover particles during or right after mopping. However, I find it better to sweep/vacuum and mop very well beforehand, let the floor dry, then apply Mop&Glo, picking up any particles still left (they always seem to come from somewhere, huh?). My opinions aside, here are the official steps to applying Mop&Glo, according to manufacturers instructions:
"Before applying Mop & Glo, sweep or vacuum the floor.
Common Issues with Mop&Glo
The most common issues I see after people have used Mop&Glo are dirt or hair stuck in the layers of dried applications and a grayish buildup around the edges of the floor, near the baseboards. Other common complaints are sticky areas, discoloration, or a dull/milky appearance after drying.
Trapped dirt and hair often arise from not cleaning the floor well enough before applications or unexpected foot traffic before drying. The discolorations and sticky buildup usually occur if the floor was unsealed/worn wood, unsealed ceramic or porcelain tile, or after many applications of the product.
Sometimes wood and tile floors come out milky, hazy, or streaky. I believe this is most often caused by over-applying, or using on previously oiled or waxed floors. Since Mop&Glo is acrylic based, it may not mix well with previously applied waxes and oils.
How to remove Mop&Glo from your floors.
Applying Mop&Glo can be easy and produce satisfying results, but when things do go wrong, it can be a pain to remove.
According to the manufacturers, "If your floor shows signs of build-up or discoloration, regularly remove the older layers of polish with the following process:
Mix 1/4 cup all purpose cleaner (non bleach containing), and add 1 cup ammonia in 1/2 gallon of warm water and spread over floor. (Do not mix bleach based products with ammonia, test in an inconspicuous area first.) If your sealed hardwood floor shows signs of build up, remove the older layers of polish with a commercial floor stripper product suitable for your flooring..."
Other methods people have reported to work for them *use at your own risk:
I am an adventurous homemaker with a passion for wandering the forest trails of Alaska. When not exploring under every leaf, twig, and rock with my husband and two year old son, I tend to busy myself with keeping habitat trails from forming around the house. After more than 10 years of experience cleaning under various companies, we decided to make our own path and that is how Southeast Clean & Care started!